We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Tool steels

FIDUR 23/250 — E NiCrMo-5

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 350 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

Electrode for corrosion-resistant deposits with high strength at elevated temperatures and good thermal shock resistance. Particularly suitable for the repair and production of new hot-work tools such as forging dies, dies, open-die forging saddles, press and piercing mandrels, trimming dies, etc. Also suitable for surfacing on non-alloy and low-alloy higher-strength steels. Under oxidising and reducing conditions, the weld metal is corrosion-resistant, particularly tough and crack-resistant, with high-temperature strength, and precipitation-hardenable at about 780 °C. It work-hardens under impact and is machinable.

PositionsPA flat
PolarityDC+/AC

Classification and approvals

Classification

AWS classE NiCrMo-5
EN 14700 classE Z Ni 2
Material no. (W.-Nr.)≈ 2.4887
DIN 8555 classE 23-UM-250 CNKPTZ

Composition and properties

Chemical composition of the weld metal

C0.06
W4.50
Co2.50
Cr16.0
Fe5.00
Mo17.0
Nibalance
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)> 390 MPa
Tensile strength (Rm)> 680 MPa
Elongation (A5)40 %

Hardness

  • as welded — approx. 220 HB
  • Hardness after work hardening — approx. 400 HB

How to weld

Process

Recovery180 %

Treatment and preparation

Re-drying250–300 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm70–100 A
3.25 mm350 mm120–140 A
4 mm350 mm160–190 A
FERVEO guidance
By problem
Wear-resistant hardfacing