Download PDF
← Technical datasheet
Kjellberg · Cast iron
FERVEO

FICAST NIFE BAL — E NiFe-CI-A

Technical datasheet · covered electrode · stick electrode · Ø 3.25 – 4 mm
FT-FICAST-NIFE-BAL-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E NiFe-CI-A
Diameters
Ø 3.25 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
3.25 mm
350 mm
90–110 A
1.5 kg
KJB-00007323
4 mm
350 mm
110–150 A
1.5 kg
KJB-00007403
Application

Special electrode for cold welding of grey cast iron with lamellar graphite, spheroidal graphite cast iron and malleable cast iron, also suitable for joining cast iron (GGL and GGG grades) to non-alloy steels. The higher Al content gives improved welding characteristics, with higher resistance to porosity but lower toughness than FICAST NiFe and FICAST NiFe B. The bimetallic core wire ensures a stable arc, good wetting and, as it withstands high welding currents, a higher deposition rate. The weld metal is machinable and is characterised by high crack resistance.

Classification
AWS class
E NiFe-CI-A
EN ISO class
E C NiFe-CI A1
Chemical composition of the weld metal
C
Al
Fe
Mn
Ni
Si
1.30
present
47.0
0.70
50.0
0.70
Values in mass %.
Mechanical properties
Tensile strength (Rm)
> 450 MPa
Hardness
180 HB
Process
Polarity
DC±/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PF vertical-up
Treatment and preparation
Re-drying
100–150 °C / 1 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FICAST-NIFE-BAL-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue