Tool steels
FERVEO TLS 2567 MIG
solid wireCatalogue only
also as: TIG rod
AWS class
EN 14700 S Fe 3
EN ISO class
S Fe 3
Classification
| AWS class | EN 14700 S Fe 3 |
|---|---|
| EN ISO class | S Fe 3 |
Purpose
- Heat-resistant W-V solid wire (S Fe 3), high wear resistance and very good tempering resistance.
- Surfacing and repair of hot-work tooling on unalloyed or low-alloy steel.
Why it works
Elevated tungsten (4.05%) is the dominant element in this alloy, unlike the chromium or molybdenum of this datasheet's other TLS wires — the as-deposited (unannealed) microstructure is martensitic with retained austenite and carbides, a structure the manufacturer documents as heat-resistant with very good tempering resistance.
Fields of application
- Surfacing and repair of hot-work tooling on unalloyed or low-alloy steel.
- Parts where tempering resistance under repeated thermal cycling is critical.
Chemical composition
| Element | Typical, % |
|---|---|
| C | 0.3 |
| V | 0.5 |
| W | 4.05 |
| Cr | 2.3 |
| Mn | 0.3 |
| Si | 0.3 |
Mechanical properties
Process
| Polarity | DC+ |
|---|---|
| Shielding gas | M1,M2,M3 |
Sizes and part numbers
| Ø | Request |
|---|---|
| 0.8 mm | |
| 1 mm | |
| 1.2 mm | |
| 1.6 mm |
Supply programme
spools C300 / D100 / D200 / K200 / K300
Advantages
- Very good tempering resistance — holds hardness under repeated thermal cycling.
- Tungsten as the dominant element — a different wear profile from the rest of the TLS line.
Limitations
- Supplier datasheet gives no HRC/HB hardness data — only the microstructure (martensite with retained austenite and carbides) is documented.