Stainless steels
FERVEO INX 307Si MIG
solid wireCatalogue only
also as: TIG rod
AWS class
ER 307 mod.
EN ISO class
G/W 18 8 Mn
Tensile strength (Rm)
650 MPa
Service temperature
−120 … 300 °C
Classification
| AWS class | ER 307 mod. |
|---|---|
| EN ISO class | G/W 18 8 Mn |
| Material no. (W.-Nr.) | 1.4370 |
| Other standards | ISO 20172: Gruppe 8.1 · TÜV Kennblatt 1000: Gruppe 30 |
Purpose
- Solid Cr-Ni-Mn wire (18.5% Cr · 8.5% Ni · 7% Mn), also weldable on TIG, for joining austenitic manganese steels, dissimilar steels and high-carbon steels.
Why it works
The wire version (MIG/MAG and TIG) of the same CrNiMn 307 family — besides joining, it also works as a buffer layer under hard-alloy armor plating, same role as the family's electrode and flux-cored wire.
Fields of application
- Joining of austenitic manganese steels, dissimilar steels and high-carbon steels.
- Buffer layer under hard-alloy armor plating.
Chemical composition
| Element | Typical, % |
|---|---|
| C | 0.1 |
| Cr | 18.5 |
| Mn | 7 |
| Ni | 8.5 |
| Si | 0.8 |
Mechanical properties
| Tensile strength (Rm) | 650 MPa |
|---|---|
| Yield strength (Rp0.2) | 400 MPa |
| Elongation (A5) | 35 % |
| Impact energy (KV) | 80 J |
| Service temperature | −120 … 300 °C |
Process
| Polarity | DC+ |
|---|---|
| Shielding gas | M21,M12,M13 |
Sizes and part numbers
| Ø | Request |
|---|---|
| 0.8 mm | |
| 1 mm | |
| 1.2 mm | |
| 1.6 mm |
Supply programme
spools C300 / D100 / D200 / K200 / K300
Advantages
- Weldable in MIG/MAG and also in TIG.
- High manganese content (7%): the deposit work-hardens, giving good wear resistance.
Limitations
- The deposit's work-hardening (high Mn) makes machining difficult unless done before it hardens.