Copper & bronze
FERVEO CUP AL9FE MIG
solid wireCatalogue only
also as: TIG rod
AWS class
ERCuAl-A2
EN ISO class
~ S Cu 6180 (CuAl10)
Hardness
130 HB
Classification
| AWS class | ERCuAl-A2 |
|---|---|
| EN ISO class | ~ S Cu 6180 (CuAl10) |
Purpose
- Iron-bearing aluminum bronze solid wire (CuAl10, 8.5-11% Al, 0.5-1.5% Fe), stronger than CUP AL8 MIG — joining copper-aluminum alloys and surfacing on steel.
Why it works
The added iron (0.5-1.5%) refines the grain and raises strength (Rm 450 MPa, hardness 130 HB) versus CUP AL8 MIG (Rm 430 MPa, 100 HB) — a mid-tier aluminum bronze, between AL8 and the nickel-bearing variants.
Fields of application
- Joining copper-aluminum and copper-copper alloys.
- Surfacing unalloyed and low-alloy steels, and cast steel parts.
Chemical composition
| Element | Typical, % |
|---|---|
| Al | 8.5–11 |
| Cu | balance |
| Fe | 0.5–1.5 |
| Mn | ≤ 1 |
| Ni | ≤ 1 |
Mechanical properties
| Tensile strength (Rm) | 450 MPa |
|---|---|
| Elongation (A5) | 20 % |
| Hardness | 130 HB |
Process
| Polarity | DC+ |
|---|---|
| Shielding gas | I1 |
Sizes and part numbers
| Ø | Request |
|---|---|
| 0.8 mm | |
| 1 mm | |
| 1.2 mm | |
| 1.6 mm |
Supply programme
spools D100 / D200 / K200 / K300 · Ø 0.8 / 1 / 1.2 / 1.6 mm
Advantages
- Higher strength and hardness than CUP AL8 MIG (Rm 450 MPa, 130 HB).
Limitations
- Not suitable for oxy-fuel gas welding.
- Lower ductility than CUP AL8 MIG (A5 20% versus 40%).