Aluminium
FERVEO ALU 1450 MIG
solid wireCatalogue only
also as: TIG rod
AWS class
1450
EN ISO class
EN ISO 18273 (2016) : Al 1450 - Al99,5Ti
Tensile strength (Rm)
80 MPa
Classification
| AWS class | 1450 |
|---|---|
| EN ISO class | EN ISO 18273 (2016) : Al 1450 - Al99,5Ti |
Purpose
- Pure aluminum solid wire with titanium (Al99.5Ti) exclusively for joining pure-aluminum alloys.
- Ti refines the deposit's grain compared to ALU 1070/1080.
Why it works
Titanium (0.15%) acts as a grain refiner — the deposit solidifies with a finer grain than ALU 1070 or ALU 1080, slightly improving surface finish and reducing hot cracking on more complex geometries, without changing the deposit's pure-aluminum nature.
Fields of application
- Joining pure-aluminum alloys where a fine-grain finish matters.
- Complex-geometry parts where hot cracking is a greater risk.
Chemical composition
| Element | Typical, % |
|---|---|
| Al | balance |
| Ti | 0.15 |
Mechanical properties
| Tensile strength (Rm) | 80 MPa |
|---|---|
| Yield strength (Rp0.2) | 30 MPa |
| Elongation (A5) | 30 % |
Process
| Polarity | DC+ |
|---|---|
| Shielding gas | I1 |
Sizes and part numbers
| Ø | Request |
|---|---|
| 0.8 mm | |
| 1 mm | |
| 1.2 mm | |
| 1.6 mm |
Supply programme
spools D100 / D200 / K200 / K300
Base metals
Al99Al99.5Al99.7Al99.8
Advantages
- Finer grain than ALU 1070/1080 — better finish and lower hot-cracking risk.
- Preserves pure aluminum's high conductivity and corrosion resistance.
Limitations
- Very low mechanical strength (Rm 80 MPa) — not suitable for any structural application.
- No base composition data in the supplier datasheet beyond the Ti — for the rest, see pure aluminum (ALU 1080).