Gedik · Stainless steels

ELOXCOR S 308 L FCW — E 308 L T1-1/-4
Technical datasheet · flux-cored wire (FCW) · Ø 1.2 mm
FT-ELOXCOR-S-308-L-FCW-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
flux-cored wire (FCW)
Standard
E 308 L T1-1/-4
Diameters
Ø 1.2 mm
Application
- Rutile type, rapid hardening flux cored wire
- Weld metal structure is austenitic (CrNi alloyed, 308 type)
- Used in pharmaceutical, paper and food industry
- Ferritic stainless steel, high carbon 304 and stabilized 347 grades can be welded this wire
- Weld metal has resisting between -196°C and 400°C service temperature
- Shielding Gas: CO2 or M21
Classification
AWS class
E 308 L T1-1/-4
EN ISO class
T 19 9 L P M21/C1 1
Approvals
ELOXCOR S 308 L (CO2): DNV-GL, CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.03
20.0
1.40
10.5
0.70
Values in mass %.
Base metals
(1.4306) X2CrNi19-11 · (1.4301) X5CrNi18-10 · (1.4311) X2 CrNiN 18-10 · (1.4312) GX10CrNi18-8) · AISI 304-304L-304LN · 302 · 321-347
ASTM: A 157 · Gr C9 · A 320 Gr B8C or D
Mechanical properties
typical values, with M21 gas
Yield strength (Rp0.2)
460 MPa
Tensile strength (Rm)
620 MPa
Elongation (A5)
36 %
Impact energy (KV)
34 J (−196 °C)
Service temperature
max. 400 °C
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOXCOR-S-308-L-FCW-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue