We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOXCOR S 308 L FCW — E 308 L T1-1/-4

flux-cored wire (FCW)

Choose the size

  • Ø 1.2 mm · D 300
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 136 · η 0.80–0.90
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

5.07–7.71 kg

of ELOXCOR S 308 L FCW for 10 m of weld

1 pack of 15 kg

Calculated with: η 0.80–0.90: typical value for process 136 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 308L

Not recommendedFN — (WRC-1992)

  • Martensite in the weld: risk of cracking. Use a richer filler (309L, 312) or lower the dilution.

Maximum dilution with this filler: 11.5 %

Calculated with: filler 308L — this product · dilution 30 % typical of 136, equal shares of each metal

See the full calculation →

Field of application

  • Rutile type, rapid hardening flux cored wire
  • Weld metal structure is austenitic (CrNi alloyed, 308 type)
  • Used in pharmaceutical, paper and food industry
  • Ferritic stainless steel, high carbon 304 and stabilized 347 grades can be welded this wire
  • Weld metal has resisting between -196°C and 400°C service temperature
  • Shielding Gas: CO2 or M21

Base metals

(1.4306) X2CrNi19-11(1.4301) X5CrNi18-10(1.4311) X2 CrNiN 18-10(1.4312) GX10CrNi18-8)AISI 304-304L-304LN302321-347
ASTM:
A 157Gr C9A 320 Gr B8C or D
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC+
Shielding gasCO2, M21

Classification and approvals

Classification

AWS classE 308 L T1-1/-4
EN ISO classT 19 9 L P M21/C1 1

Approvals

  • ELOXCOR S 308 L (CO2): DNV-GL, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.03
Cr20.0
Mn1.40
Ni10.5
Si0.70
Values in mass %.

Mechanical properties

typical values, with M21 gas
Yield strength (Rp0.2)460 MPa
Tensile strength (Rm)620 MPa
Elongation (A5)36 %
Impact energy (KV)34 J (−196 °C)
Service temperaturemax. 400 °C

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Corrosion-resistant alloys