Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX R 310 — ~E 310-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-310-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
~E 310-16
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
50–80 A
GDK-3010101158
3.2 mm
300 mm
80–110 A
GDK-3010101163
3.2 mm
350 mm
80–110 A
GDK-3010101168
4 mm
350 mm
110–140 A
GDK-3010101173
Application
  • The weld metal is suitable for service temperatures up to +1200 °C
  • Can also be used with alternating current
  • Redrying is required for at least 2 hours at 120 °C to 200 °C
Classification
AWS class
~E 310-16
EN ISO class
E 25 20 R 32
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.12
26.0
2.50
20.0
0.90
Values in mass %.
Base metals

pipes made of Cr-Ni and Cr-Si-Al-alloyed steels · X15CrNiSi 25-20 · X15CrNiSi 25-21 · X15CrNrSi 20-12 · G-X40CrNi25 · GX40CrNiSi229 · X10CrAl · X10CrAl24 · GX40CrSi1 · AISI 305 · 310 · 304

Mechanical properties
Yield strength (Rp0.2)
min. 355 MPa
Tensile strength (Rm)
560–690 MPa
Elongation (A5)
min. 25 %
Impact energy (KV)
min. 47 J (20 °C)
Service temperature
max. 1200 °C
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-310-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX R 310 — ~E 310-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-310-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
120–200 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-310-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue