Gedik · Stainless steels
ELOX R 310 — ~E 310-16
covered electrode · stick electroderutile coating
Choose the size
- Ø 2.5 × 250 mm≈ 5 kg
- Ø 3.2 × 300 mm≈ 5 kg
- Ø 3.2 × 350 mm≈ 5 kg
- Ø 4 × 350 mm≈ 5 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
7.02–11.21 kg
of ELOX R 310 for 10 m of weld
3 packs of ≈ 5 kg
Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Which filler joins two different metals?With this product's data: 310
Not recommendedFN — (WRC-1992)
- Fully austenitic: sensitive to hot cracking.
- Filler 310 gives a fully austenitic weld: with carbon-steel dilution it is prone to hot cracking. For this joint use 309L or 312.
Calculated with: filler 310 — this product · dilution 30 % typical of 111, equal shares of each metal
See the full calculation →Field of application
- The weld metal is suitable for service temperatures up to +1200 °C
- Can also be used with alternating current
- Redrying is required for at least 2 hours at 120 °C to 200 °C
Base metals
pipes made of Cr-Ni and Cr-Si-Al-alloyed steelsX15CrNiSi 25-20X15CrNiSi 25-21X15CrNrSi 20-12G-X40CrNi25GX40CrNiSi229X10CrAlX10CrAl24GX40CrSi1AISI 305310304
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up |
|---|---|
| Polarity | DC+/AC |
Classification and approvals
Classification
| AWS class | ~E 310-16 |
|---|---|
| EN ISO class | E 25 20 R 32 |
Approvals
- TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the weld metal
| C | 0.12 |
|---|---|
| Cr | 26.0 |
| Mn | 2.50 |
| Ni | 20.0 |
| Si | 0.90 |
Values in mass %.
Mechanical properties
| Yield strength (Rp0.2) | min. 355 MPa |
|---|---|
| Tensile strength (Rm) | 560–690 MPa |
| Elongation (A5) | min. 25 % |
| Impact energy (KV) | min. 47 J (20 °C) |
| Service temperature | max. 1200 °C |
How to weld
Treatment and preparation
| Re-drying | 120–200 °C / min. 2 h |
|---|
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2.5 mm | 250 mm | 50–80 A |
| 3.2 mm | 300 mm | 80–110 A |
| 3.2 mm | 350 mm | 80–110 A |
| 4 mm | 350 mm | 110–140 A |
FERVEO guidance
By problem
Corrosion-resistant alloys