We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX R 309 L-17 — E309L-17

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.02–11.21 kg

of ELOX R 309 L-17 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 309L

With reservationsFN 2.1 (WRC-1992)

  • Ferrite below 3 FN: risk of hot cracking (API RP 582, TWI).

Maximum dilution with this filler: 25.5 %

Calculated with: filler 309L — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • Low-carbon electrode with a rutile covering for high-strength non-alloy steels, steels for quenching and tempering, ferritic Cr steels, austenitic CrNi steels and austenitic manganese steels
  • For similar austenitic stainless steels and dissimilar metals; buffer layers on non-alloy and low-alloy steels before build-up or surfacing with any stainless electrode; joining corrosion-resistant stainless steel to non-alloy or low-alloy steels; clad steels
  • Good crack resistance on difficult-to-weld steels
  • The weld metal has a high ferrite content
  • Redrying is required for at least 2 hours at 120 °C to 200 °C

Base metals

High-strength unalloyed and heat-treatable steelsferritic Cr and austenitic CrNi steelsaustenitic Mn steelsUnalloyed tempered steelstool steelshard manganese steelshard-to-weld steels
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE309L-17
EN ISO classE 23 12 L R 32

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.03
Cr23.0
Mn0.80
Ni12.6
Si0.80
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 440 MPa
Tensile strength (Rm)540–720 MPa
Elongation (A5)min. 30 %
Impact energy (KV)min. 47 J (20 °C)

How to weld

Treatment and preparation

Re-drying120–200 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm250 mm60–90 A
3.2 mm350 mm80–120 A
4 mm350 mm100–160 A
FERVEO guidance
By problem
Dissimilar metalsStainless steel and dissimilar metalsCorrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
ELOX R 309 LGedikE 23 12 L R 32540–720 MPamin. 47 J (20 °C)To order · price and lead time in the quote
FINOX 4332 ACKjellbergE 23 12 L R 32> 550 MPa> 55 J (room temperature)To order · price and lead time in the quote