Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX R 307 — ~ E 307-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-307-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
~ E 307-16
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
60–80 A
GDK-3010100908
3.2 mm
350 mm
80–110 A
GDK-3010100913
4 mm
350 mm
110–140 A
GDK-3010100918
Application
  • For high-strength steels, alloy and non-alloy steels, heat-resisting steels, stainless Cr steels, 14 % Mn steels and difficult-to-weld steels
  • Joining and surfacing of dissimilar metals
  • Rutile covering
  • Austenitic weld metal with thermal shock resistance
  • The weld metal remains tough down to -100 °C
  • Redrying is required for at least 2 hours at 120 °C to 200 °C
Classification
AWS class
~ E 307-16
EN ISO class
E 18 8 Mn R 32
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.11
19.0
4.50
8.50
1.00
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
min. 390 MPa
Tensile strength (Rm)
600–770 MPa
Elongation (A5)
min. 30 %
Impact energy (KV)
min. 47 J (20 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-307-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX R 307 — ~ E 307-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-307-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
120–200 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-307-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue