We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX R 307 — ~ E 307-16

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Which filler joins two different metals?With this product's data: 307

SuitableFN 0.0 (WRC-1992)

  • Fully austenitic with manganese: tolerates no ferrite (307 type).

Maximum dilution with this filler: 45.5 %

Calculated with: filler 307 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • For high-strength steels, alloy and non-alloy steels, heat-resisting steels, stainless Cr steels, 14 % Mn steels and difficult-to-weld steels
  • Joining and surfacing of dissimilar metals
  • Rutile covering
  • Austenitic weld metal with thermal shock resistance
  • The weld metal remains tough down to -100 °C
  • Redrying is required for at least 2 hours at 120 °C to 200 °C
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS class~ E 307-16
EN ISO classE 18 8 Mn R 32

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.11
Cr19.0
Mn4.50
Ni8.50
Si1.00
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 390 MPa
Tensile strength (Rm)600–770 MPa
Elongation (A5)min. 30 %
Impact energy (KV)min. 47 J (20 °C)

How to weld

Treatment and preparation

Re-drying120–200 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm250 mm60–80 A
3.2 mm350 mm80–110 A
4 mm350 mm110–140 A
FERVEO guidance
By problem
Dissimilar metalsStainless steel and dissimilar metalsCorrosion-resistant alloys