Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX BS 410 Ni Mo — E 410NiMo-25

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-BS-410-NI-MO-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 410NiMo-25
Diameters
Ø 2.5 – 4 mm
Application
  • Electrode with a basic covering for welding similar corrosion-resisting martensitic and martensitic-ferritic rolled, forged and cast steels
  • For hydraulic turbines, compressors and steam power plants
  • Resistant to corrosion by water, steam and seawater atmospheres
  • Excellent slag removal and a smooth bead appearance
  • Metal recovery approx. 130 %; suitable for positional welding
  • Preheating and interpass temperature for thick-walled components: 100 °C to 160 °C
  • Tempering temperature: 580 °C to 620 °C
  • Redrying is required for at least 2 hours at 300 °C to 350 °C
Classification
AWS class
E 410NiMo-25
EN ISO class
E 13 4 B 62
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Mo
Ni
Si
0.05
11.5
0.50
0.50
4.50
0.30
Values in mass %.
Base metals

X5CrNi 13 4 · G-X5CrNi 13 4 · X6Cr 13 · G-X5CrNi 13 6

Mechanical properties
Yield strength (Rp0.2)
min. 600 MPa
Tensile strength (Rm)
800–980 MPa
Elongation (A5)
min. 15 %
Impact energy (KV)
min. 47 J (20 °C)
Hardness
approx. 270 HB
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Recovery
approx. 130 %
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-BS-410-NI-MO-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX BS 410 Ni Mo — E 410NiMo-25

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-BS-410-NI-MO-EN
rev. 2 · 2026-11-21
page 2 / 2
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
70–110 A
GDK-3010101488
3.2 mm
350 mm
110–150 A
GDK-3010101493
4 mm
350 mm
150–190 A
GDK-3010101498
Treatment and preparation
Re-drying
300–350 °C / min. 2 h
Pre-heating
100–160 °C, for thick-walled components
Interpass temperature
100–160 °C, for thick-walled components
Post-weld heat treatment
580–620 °C
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-BS-410-NI-MO-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue