Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX B 410 — E 410-15

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-B-410-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 410-15
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
50–90 A
GDK-3010101458
3.2 mm
350 mm
80–120 A
GDK-3010101463
4 mm
350 mm
110–160 A
GDK-3010101468
Application
  • 13 % Cr electrode for joining and surfacing martensitic and martensitic-ferritic 13 % Cr steels and cast steels (also suitable for surfacing the sealing faces of gas, water and steam valves)
  • Annealing at 750 °C for 2 hours, then furnace cooling to room temperature
  • Redrying is required for at least 2 hours at 300 °C to 350 °C
Classification
AWS class
E 410-15
EN ISO class
E 13 B 22
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Si
0.07
13.5
0.80
0.70
Values in mass %.
Base metals

X6Cr 13 · X6CrAl 13 · X15Cr 13 · X10Cr 13 · G-X10Cr 13

Mechanical properties
Yield strength (Rp0.2)
min. 450 MPa
Tensile strength (Rm)
650–800 MPa
Impact energy (KV)
min. 15 J (20 °C)
Hardness
as welded
approx. 350 HB
after annealing: 750 °C / 2 h / furnace
200 HB
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-B-410-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX B 410 — E 410-15

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-B-410-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-B-410-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue