Gedik · Hardfacing

ELHARD 650 — E Fe 6
Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 5 mm
FT-ELHARD-650-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Fe 6
Diameters
Ø 3.2 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
3.2 mm
350 mm
100–140 A
GDK-3010100333
4 mm
450 mm
140–180 A
GDK-3010101846
5 mm
450 mm
180–230 A
GDK-3010101849
Application
- For hardfacing in the earthmoving industry and on wear parts of grinding mills, etc.
- Can be applied directly; if 3 or more layers are to be deposited, apply a buffer layer first, depending on the material grade (ELHARD 63, ELHARD 250, ELOX R 307 or ELHARD 14 Mn)
- For hardenable steels, the preheating temperature is 100 °C to 300 °C
- Redrying of the electrodes before use at 300 °C to 350 °C for at least 2 h is recommended
Classification
EN 14700 class
E Fe 6
DIN 8555 class
E6-UM-60
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Mo
Nb
Si
0.55
6.80
1.35
1.20
0.60
0.75
Values in mass %.
Hardness
56–59 HRC
Process
Polarity
DC+
Treatment and preparation
Re-drying
300 °C / 2 h
Pre-heating
100–300 °C, for hardenable steels
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELHARD-650-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue