Download PDF
← Technical datasheet
Gedik · Hardfacing
FERVEO

ELHARD 600 S — E Fe 8

Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 5 mm
FT-ELHARD-600-S-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E Fe 8
Diameters
Ø 3.2 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
3.2 mm
350 mm
100–140 A
GDK-3010101822
4 mm
450 mm
140–180 A
GDK-3010101825
5 mm
450 mm
180–230 A
GDK-3010101828
Application
  • For the final hardfacing layer on parts of earthmoving and mining machines, impact drilling and crushing tools, screw conveyors, cutting edges of cutting tools, hard manganese steels, and bucket lips and teeth made of alloyed or non-alloy steels, and on other materials requiring high wear resistance
  • Basic electrode with a thick covering
  • Very hard electrode with a chromium-silicon alloy
  • Ductile, crack-resistant weld metal: thanks to its high ductility it does not crack under impact loading; machinable by grinding only; preheating to 200–300 °C is recommended for thick workpieces and materials prone to hardening
  • On harder and higher-grade steels, apply a buffer layer with LASER B 50 or TEMPO B 63 or, in some cases, with ELOX B307 or ELOX R 312
  • Weld with a short arc length, holding the electrode perpendicular to the workpiece
  • Redrying of the electrodes before use at 300 °C to 350 °C for at least 2 h is recommended
Classification
EN 14700 class
E Fe 8
DIN 8555 class
E6-UM-60 P
Approvals

SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Si
0.50
9.00
1.80
Values in mass %.
Hardness
54–58 HRC
after heat treatment: 1000–1050 °C / oil
approx. 60 HRC
after tempering: 300–400 °C
53–55 HRC
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELHARD-600-S-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Hardfacing
FERVEO

ELHARD 600 S — E Fe 8

Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 5 mm
FT-ELHARD-600-S-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Treatment and preparation
Re-drying
300 °C / 2 h
Pre-heating
200–300 °C, when welding thick workpieces and materials prone to hardening
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELHARD-600-S-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue