We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Hardfacing

ELHARD 600 S — E Fe 8

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 450 mm
    ≈ 5 kg
  • Ø 5 × 450 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

  • For the final hardfacing layer on parts of earthmoving and mining machines, impact drilling and crushing tools, screw conveyors, cutting edges of cutting tools, hard manganese steels, and bucket lips and teeth made of alloyed or non-alloy steels, and on other materials requiring high wear resistance
  • Basic electrode with a thick covering
  • Very hard electrode with a chromium-silicon alloy
  • Ductile, crack-resistant weld metal: thanks to its high ductility it does not crack under impact loading; machinable by grinding only; preheating to 200–300 °C is recommended for thick workpieces and materials prone to hardening
  • On harder and higher-grade steels, apply a buffer layer with LASER B 50 or TEMPO B 63 or, in some cases, with ELOX B307 or ELOX R 312
  • Weld with a short arc length, holding the electrode perpendicular to the workpiece
  • Redrying of the electrodes before use at 300 °C to 350 °C for at least 2 h is recommended
PolarityDC+

Classification and approvals

Classification

EN 14700 classE Fe 8
DIN 8555 classE6-UM-60 P

Approvals

  • SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.50
Cr9.00
Si1.80
Values in mass %.

Hardness

  • 54–58 HRC
  • after heat treatment: 1000–1050 °C / oil — approx. 60 HRC
  • after tempering: 300–400 °C — 53–55 HRC

How to weld

Treatment and preparation

Re-drying300 °C / 2 h
Pre-heating200–300 °C, when welding thick workpieces and materials prone to hardening

Welding parameters by diameter

ØLengthCurrent
3.2 mm350 mm100–140 A
4 mm450 mm140–180 A
5 mm450 mm180–230 A
FERVEO guidance
By problem
Wear-resistant hardfacing
Alternatives in the catalogue
Same class
same DIN 8555 designation
ProductClassAvailability
ELHARD 600GedikE 6-UM-60-PTo order · price and lead time in the quote
ELHARD 600 RGedikE 6-UM-60-PTo order · price and lead time in the quote
FIDUR 6/60KjellbergE 6-UM-60-PTo order · price and lead time in the quote
FIDUR 6/60 RKjellbergE 6-UM-60-PTo order · price and lead time in the quote