Gedik · Creep-resisting Cr-Mo steels

ELCOR R CrMo1 FCW — E81 T1-B2C
Technical datasheet · flux-cored wire (FCW) · Ø 1.2 mm
FT-ELCOR-R-CRMO1-FCW-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
flux-cored wire (FCW)
Standard
E81 T1-B2C
Diameters
Ø 1.2 mm
Application
- Rutile type flux-cored wire
- Typical applications are vessel and steel construction, mechanical engineering and pipe work
- Good arc restriking even with cold wire tip, suitable for robot applications
- Multi-pass welding without in-between cleaning
- Ideal for use in the field short arc and spray arc
- Excellent gap bridging for root welding
- High-efficiency type for economic production environments
- Shielding gas: CO2
Classification
AWS class
E81 T1-B2C
EN ISO class
T CrMo1 R C 2
Approvals
CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.06
1.20
1.20
0.50
0.50
Values in mass %.
Base metals
DIN: 13 CrMo 44 · 24 CrMo 5
Cast Steels: GS 17CrMo55 · GS 22CrMo54 · G17CrMo5-5 · G22CrMo5-4
EN: 13 CrMo 4-5
ASTM: A 182 · A 387 · A217 · A 387 Gr. 11-12
Mechanical properties
typical values, with M21 gas
after heat treatment: 680 °C / 1 h
Yield strength (Rp0.2)
min. 460 MPa
Tensile strength (Rm)
550–690 MPa
Elongation (A5)
min. 19 %
Impact energy (KV)
min. 80 J (room temperature)
after heat treatment: 920 °C / 30 min
Yield strength (Rp0.2)
min. 320 MPa
Tensile strength (Rm)
450–550 MPa
Elongation (A5)
min. 26 %
Impact energy (KV)
min. 100 J (room temperature)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELCOR-R-CRMO1-FCW-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue