We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Carbon steels

ELCOR B 70 FCW — E70T-5M J

flux-cored wire (FCW)

Choose the size

  • Ø 1.2 mm · BS 300
    ≈ 15 kg
  • Ø 1.6 mm · BS 300
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 136 · η 0.80–0.90
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

5.03–7.66 kg

of ELCOR B 70 FCW for 10 m of weld

1 pack of 15 kg

Calculated with: η 0.80–0.90: typical value for process 136 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm

105 °C

Minimum preheat and minimum interpass temperature

EN 1011-2, annex C, method B · rounded up to 5 °C

✓ Within the range of method B.

Calculated with: HD 5 ml/100 g from this product's class H5 · 136 — gas-shielded flux-cored: 26 V, 220 A, 30 cm/min

See the full calculation →

Field of application

  • Basic flux-cored wire for the automatic and semi-automatic welding of non-alloy and low-alloy structural steels and fine-grain steels
  • Steady arc, deep penetration and pore-free welds
  • Better notch impact toughness at low temperatures than E 71 T-1
  • Shielding gas: M21

Base metals

EN:
S185S235-S355P 235 GHP 265 GHP 295 GHP 235 T1/T2-P355Nl2 10-L485S 255-S460X42-X70
ASTM:
A 131A106A515A 714A283A285A414A662A372A369A210A516A255A 333A350
PositionsPA flat PB horizontal-vertical
PolarityDC+
Shielding gasM21

Classification and approvals

Classification

AWS classE70T-5M J
EN ISO classT 42 4 B M 3 H5

Approvals

  • CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.05
Mn1.35
Si0.55
Values in mass %.

Mechanical properties

as welded
Yield strength (Rp0.2)min. 420 MPa
Tensile strength (Rm)520–670 MPa
Elongation (A5)min. 22 %
Impact energy (KV)120 J (−30 °C) · min. 47 J (−40 °C)

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Similar
ISO 17632-A: same strength (42), equal or better toughness (47 J at −40 °C), same cored-wire type (B)
ProductClassRmAvailability
DT-BF 31 FCWDratecT 42 4 B C 3 H5530–680 MPaTo order · price and lead time in the quote