We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Dratec · Low-alloy steels

DT-MF 15 FCW — E110T15-M21A8-K4-H4

flux-cored wire (FCW)

Choose the size

  • Ø 1.2 mm
    ≈ 15 kg
  • Ø 1.6 mm
    ≈ 15 kg

Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg), K300 (15–20 kg)

To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 138 · η 0.90–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

4.62–6.81 kg

of DT-MF 15 FCW for 10 m of weld

1 pack of ≈ 15 kg

Calculated with: η 0.90–0.98: typical value for process 138 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →

Field of application

Metal powder cored wire without slag. Suitable for the spatter-free welding of fine-grain structural steels where a high tensile strength is required (e.g. crane and plant construction); very good welding properties, therefore particularly suitable for robot applications (good arc restriking); recovery >93 %

Base metals

NA-X-TRA 55–70Weldox 700S690QL1
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC+
Shielding gasM2

Classification and approvals

Classification

AWS classE110T15-M21A8-K4-H4
EN ISO classT69 6 Mn2NiCrMo MM 1H5

Composition and properties

Chemical composition of the wire

C0.07
Cr0.50
Mn1.50
Mo0.40
Ni2.20
Si0.40
Values in mass %.

Mechanical properties

guide values
Yield strength (Rp0.2)> 690 MPa
Tensile strength (Rm)> 760 MPa
Elongation (A5)> 15 %
Impact energy (KV)60 J

How to weld

Process

ShieldingRequires shielding gas
Recovery> 93 %
FERVEO guidance
By problem
Structural steels