We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Dratec · Hardfacing

DT-DUR 55Mo FCW — T Z Fe 14

flux-cored wire (FCW)

Choose the size

  • Ø 1.6 mm · K300 15–20 kg
    ≈ 15 kg
  • Ø 2 mm · K300 15–20 kg
    ≈ 15 kg
  • Ø 2.4 mm · K300 15–20 kg
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

DT-DUR 55 Mo is a self-shielded flux-cored wire highly alloyed with C, Cr and Mo. It is suitable for surfacing parts exposed to severe wear by mineral materials. The weld metal is rust-resistant. Surfacing should be carried out in 2-3 layers with a maximum thickness of 8 mm. The best results are obtained with a two-layer weld. The weld metal should be subjected only to limited shock and impact. With a small wire diameter and an ideal current setting, crack-free surfacing is possible. The addition of 1.3 % molybdenum also gives the deposit a higher strength at high temperatures than the alloy DT-DUR 55 (up to 450 °C). Grinding bowls, crushing rolls

Classification and approvals

Classification

EN 14700 classT Z Fe 14
DIN 8555 classMF 10-GF-60-G

Composition and properties

Chemical composition of the wire

C5.00
Cr27.0
Mo1.30
Ni0.60
Si1.70
Values in mass %.

Hardness

guide values
  • 57–60 HRC

How to weld

Process

ShieldingSelf-shielded (open arc)

Welding parameters by diameter

ØCurrentVoltage
1.6 mm160–260 A20–26 V
2 mm220–280 A22–26 V
2.4 mm260–340 A26–30 V
FERVEO guidance
By problem
Wear-resistant hardfacing
Alternatives in the catalogue
Same class
same DIN 8555 designation
ProductClassAvailability
HARDCOR 62 O FCWGedikMF 10-GF-60-GTo order · price and lead time in the quote
HARDCOR 63 O FCWGedikMF 10-GF-60-GTo order · price and lead time in the quote