Choose the size
- Ø 0.8 mm · K300 15–20 kg≈ 15 kg
- Ø 1 mm · K300 15–20 kg≈ 15 kg
- Ø 1.2 mm · K300 15–20 kg≈ 15 kg
- Ø 1.6 mm · K300 15–20 kg≈ 15 kg
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 135 · η 0.92–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
5.02–7.24 kg
of DT-CuSi 3 MIG for 10 m of weld
1 pack of ≈ 15 kg
Calculated with: η 0.92–0.98: typical value for process 135 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Field of application
Joint welding of copper, copper-zinc alloys; surfacing on cast iron, as well as on unalloyed and low-alloy steels; MIG brazing of galvanised steel sheets, as well as of higher-strength sheets
| Polarity | DC+ |
|---|---|
| Shielding gas | I1 |
Classification and approvals
Classification
| AWS class | ER CuSi-A |
|---|---|
| EN ISO class | S Cu 6560 (CuSi3Mn1) |
Composition and properties
Chemical composition of the wire
| Cu | balance |
|---|---|
| Fe | 0.07 |
| Mn | 1.00 |
| Si | 3.00 |
| Sn | 0.10 |
| Zn | 0.10 |
Values in mass %.
Mechanical properties
guide values
| Yield strength (Rp0.2) | 150 MPa |
|---|---|
| Tensile strength (Rm) | 390 MPa |
| Elongation (A5) | 40 % |
| Impact energy (KV) | 60 J |
Hardness
guide values
- 90 HB
How to weld
Process
| Processes | MIG: recommended · TIG: recommended · gas welding: not suitable |
|---|
FERVEO guidance
By problem
Copper and bronze
Alternatives in the catalogue
Same class
same EN ISO designation
| Product | Class | Rm | Availability |
|---|---|---|---|
| R1 MIGGedik | S Cu 6560 (CuSi3Mn1) | 220 MPa | To order · price and lead time in the quote |
