Download PDF
← Technical datasheet
Kjellberg · Creep-resisting Cr-Mo steels
FERVEO

CROMO 2B — E 9018-B3

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-CROMO-2B-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 9018-B3
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
350 mm
90–110 A
4.3 kg
KJB-00491253
3.25 mm
350 mm
110–150 A
4.8 kg
KJB-00491323
4 mm
350 mm
140–180 A
6 kg
KJB-00491403
Application

Covered electrode for joining boiler and tube steels and similar CrMo-alloyed steels resistant to hydrogen under pressure, preferably for the creep-resisting steel 10CrMo9-10 at service temperatures up to 600 °C in long-term service. Also suitable for joining and surfacing on similarly alloyed case-hardening and quenched and tempered steels.

Classification
AWS class
E 9018-B3
EN ISO class
E CrMo2 B 42
Approvals

TÜV, CE

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.08
2.20
0.90
1.10
0.40
Values in mass %.
Base metals

1.7259 26 CrMo 7 · 1.7273 24 CrMo 10 · 1.7276 10 CrMo 11 · 1.7281 16 CrMo 9-3 · 1.7379 G17 CrMo 9-10 · 1.7380 10 CrMo 9-10 · 1.7382 G19 CrMo 9-10 · 1.7383 11 CrMo 9-10 · 1.7387 G12 CrMo 9-10 · 1.8075 10 CrSiMoV 7 · ASTM A 335 (P22)

Mechanical properties
after tempering: min. 0.5 h at 700 °C, cooling in still air
Yield strength (Rp0.2)
> 400 MPa
Tensile strength (Rm)
500–600 MPa
Elongation (A5)
> 20 %
Impact energy (KV)
> 47 J (20 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-CROMO-2B-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Creep-resisting Cr-Mo steels
FERVEO

CROMO 2B — E 9018-B3

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-CROMO-2B-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-CROMO-2B-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue