Download PDF
← Technical datasheet
Kjellberg · Creep-resisting Cr-Mo steels
FERVEO

CROMO 1B — E 8018-B2

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-CROMO-1B-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 8018-B2
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
350 mm
90–110 A
4.3 kg
KJB-00490253
3.25 mm
350 mm
110–150 A
4.8 kg
KJB-00490323
4 mm
350 mm
140–180 A
4.8 kg
KJB-00490403
Application

Covered electrode for joining boiler and tube steels and similar CrMo-alloyed steels resistant to hydrogen under pressure, preferably for steel 13CrMo4-5 at service temperatures up to 550 °C. Also suitable for joining and surfacing on similarly alloyed case-hardening and quenched and tempered steels.

Classification
AWS class
E 8018-B2
EN ISO class
E CrMo1 B 42
Approvals

TÜV, CE

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.08
1.00
1.00
0.50
0.40
Values in mass %.
Base metals

1.7218 25 CrMo 4 · 1.7218 G 25 CrMo 4 · 1.7254 20 CrMo 4 · 1.7258 24 CrMo5 · 1.7262 15 CrMo 5 · 1.7335 13 CrMo 4-5 · 1.7337 16 CrMo 4-4 · 1.7350 22 CrMo 4-4 · 1.7354 G22 CrMo 5-4

Mechanical properties
after tempering: min. 0.5 h at 700 °C, cooling in still air
Yield strength (Rp0.2)
> 400 MPa
Tensile strength (Rm)
510–650 MPa
Elongation (A5)
> 20 %
Impact energy (KV)
> 80 J (20 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-CROMO-1B-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Creep-resisting Cr-Mo steels
FERVEO

CROMO 1B — E 8018-B2

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-CROMO-1B-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-CROMO-1B-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue