Choose the size
- Ø 1.6 × 1000 mm · 5 kg≈ 5 kg
- Ø 2 × 1000 mm · 5 kg≈ 5 kg
- Ø 2.4 × 1000 mm · 5 kg≈ 5 kg
To order · price and lead time in the quote
We reply within 1 working day.
Field of application
- AIMg5 is magnesium alloyed aluminum TIG rod
- It is used for joining of aluminum alloys required high mechanical properties
- The weld deposit has a good resistance to atmospheric influences and sea water
- And the weld metal is proper for surface treatment such as anodizing and polishing
- it is recommended that preheating to 150°C before welding of plates thicker than 15mm
- For gas welding, GeKaTec F-LH1 is recommended
- Shielding gas: Ar
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down |
|---|---|
| Polarity | AC |
| Shielding gas | Ar |
Classification and approvals
Classification
| AWS class | ER 5356 |
|---|---|
| EN ISO class | S Al 5356 (AlMg5Cr(A)) |
| Welding process | TIG welding · gas welding |
Approvals
- SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the wire
| Al | balance |
|---|---|
| Mg | 5.00 |
| Mn | 0.50 |
| Si | 0.50 |
Values in mass %.
Mechanical properties
| Yield strength (Rp0.2) | 120 MPa |
|---|---|
| Tensile strength (Rm) | 250 MPa |
| Elongation (A5) | 25 % |
Hardness
- 70 HB
How to weld
Process
| Shielding | Requires shielding gas |
|---|
Treatment and preparation
| Pre-heating | 150 °C, for plates thicker than 15 mm |
|---|
FERVEO guidance
Alternatives in the catalogue
Same class
same AWS designation
| Product | Class | Rm | Availability |
|---|---|---|---|
| DT-AlMg5 TIGDratec | ER5356 | 250 MPa | To order · price and lead time in the quote |