We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Hardfacing

250 G MIG

solid wire

Choose the size

  • Ø 1.2 mm · BS 300 spool
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

  • Cr-Mo alloyed steels (1.5%-0.5%) resistant to high temperature, wear, pressure and shocks
  • Good resistance to cracking and to the attack of sulphurous agents
  • Guide rollers, excavators, screw conveyers, gears, moulds, rolling surfaces, etc
  • Before the application of welding, it is recommended pre-heating of 300°C
  • If necessary, post-weld stress relief should be made at 690°C
  • Shielding Gas: Ar+CO2 mix gases can be used
PolarityDC+
Shielding gasAr + CO2

Classification and approvals

Classification

DIN 8555 classMSG 1-GZ-250

Approvals

  • SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.09
Cr3.00
Mn1.00
Mo1.00
Si0.55
Values in mass %.

Hardness

  • Hardness after work hardening — 22–27 HRC

How to weld

Process

ShieldingRequires shielding gas

Treatment and preparation

Pre-heating300 °C
Post-weld heat treatment690 °C, if necessary
FERVEO guidance
Alternatives in the catalogue
Same class
same DIN 8555 designation
ProductClassAvailability
DT-SG 250 MIGDratecM/WSG 1-GZ-250To order · price and lead time in the quote