We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket

Calculators

Filler metal consumption per weld

Bevelled butt and fillet welds. The preparation is filled in to EN ISO 9692-1 and any dimension can be replaced by your drawing's. The result is in kilos, as a range: from a flush weld to the maximum excess weld metal of EN ISO 5817.

Reference, covered electrode, level C: 1 m of single-V in 10 mm plate — 0.69–1.12 kg; 1 m of fillet with throat a 5 — 0.30–0.60 kg.

Weld
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
As the drawing or the WPS requires. EN 1090-2: EXC1 → D, EXC2 → C, EXC3 → B
Preparation — EN ISO 9692-1
Gap between the plates at the rootper EN ISO 9692-1 · ref. 1.3: b ≤ 4
Straight part of the edge, not bevelledper EN ISO 9692-1 · ref. 1.3: c ≤ 2
Total angle between both groove facesper EN ISO 9692-1 · ref. 1.3: 40° ≤ α ≤ 60°
Filler
Filler
OPUS MOB · 111 — covered electrode
Deposition efficiency η
η 0.55–0.65: typical value for process 111
Weld metal (density)
7.85 g/cm³
How we calculate it
  1. Preparation cross-section, without excess weld metal — EN ISO 9692-1, ref. 1.3
    A₀ = b·t + (t − c)²·tan(α/2) = 2·10 + (10 − 1)²·tan(50°/2) = 57.77 mm²
  2. Maximum excess weld metal of level C, EN ISO 5817 (imperfection 502 + 504)
    h ≤ 1 + 0.15·w, ≤ 7 mm; w = 10.39 mm → h = 2.56 mm root (504): h_r ≤ 1 + 0.45·b, ≤ 4 mm → h_r = 1.9 mm A = A₀ + ⅔·w·h + ⅔·b·h_r = 78.04 mm²
  3. Weld metal
    M = A·L·ρ = (57.8–78 mm²)·10 m·7.85 g/cm³ = 4.54–6.13 kg
  4. Filler metal to buy
    P = M / η = 4.54 / 0.65 … 6.13 / 0.55 = 6.97–11.14 kg η 0.55–0.65: typical value for process 111

Reference values — 111 — covered electrode, level Cper 1 m of weld

ThicknessA, mm²Weld metal, kg/mFiller metal, kg/m
t 4 mm12.2–20.20.10–0.160.14–0.29
t 6 mm23.7–35.10.19–0.280.28–0.51
t 8 mm38.8–54.30.30–0.430.46–0.78
t 10 mm57.8–78.00.45–0.610.69–1.12

Weld cross-sectionto scale

w 10.4t 10b 2c 1α 50°

Real dimensions. Excess weld metal is drawn at the maximum of the chosen level; the dashed line is a flush weld.

ResultEN ISO 5817 · C

6.97–11.14 kg

of OPUS MOB for 10 m of weld

per metre
for 10 m
Weld cross-section A
57.8–78.0 mm²
Weld metal
0.45–0.61 kg
4.54–6.13 kg
Filler metal
0.69–1.12 kg
6.97–11.14 kg

Vertical and overhead welding usually takes more.

Standards and sources

  1. EN ISO 9692-1:2013 — joint preparation, steel; processes 111, 13x, 141
  2. EN ISO 5817:2023 — quality levels B, C and D; imperfections 502, 503 and 504
  3. EN ISO 2553:2019 — throat a of the fillet weld; z = a·√2
  4. EN ISO 4063:2023 — process numbers
  5. EN 10088-1 — density of stainless steels
  6. EN ISO 2401:2018 — deposition efficiency η: definition and test method (covered electrodes)

Indicative results: good for planning and ordering material; they do not replace the WPS.

← All calculators