Gedik · Tool steels

TOOL 55 FC TIG FCW — T Fe8
Technical datasheet · flux-cored wire (FCW) · Ø 2.4 mm
FT-TOOL-55-FC-TIG-FCW-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
flux-cored wire (FCW)
Standard
T Fe8
Diameters
Ø 2.4 mm
Sizes and packaging
Ø
Length
Packaging
Code
2.4 mm
1000 mm
carton box
GDK-3030600001
Application
- It is hardfacing TIG wire which has high abrasion resistance and keep hardness at high temperatures
- Application range is cold and hot work tool steels which are used in machine parts, cold and hot cutting blades, extrusion dies, rollers, steel castings, moulds, tools and metal-to-metal friction applications
- Weld metal is machinable by grinding
- It is recommended that pre-heating at 400°C before welding and very slow cooling after welding
- If necessary, it is recommended the stress relief annealing at 550°C after welding
- Shielding Gas: Argon
Classification
EN 14700 class
T Fe8
DIN 8555 class
TIG 6-GF-55-T
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the wire
C
Cr
Mn
Mo
Si
0.55
7.00
1.00
2.00
0.70
Values in mass %.
Hardness
as welded
53–56 HRC
Process
Shielding gas
Ar
Shielding
Requires shielding gas
Treatment and preparation
Pre-heating
400 °C
Post-weld heat treatment
550 °C, if necessary
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-TOOL-55-FC-TIG-FCW-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue