Download PDF
← Technical datasheet
Gedik · Tool steels
FERVEO

THERMO RESIST — E Z Fe8

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-THERMO-RESIST-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Z Fe8
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
350 mm
60–90 A
5 kg
GDK-3030100076
3.2 mm
350 mm
100–140 A
5 kg
GDK-3030100077
4 mm
350 mm
130–180 A
5 kg
GDK-3030100078
Application
  • Resistant to heat and abrasion and, owing to its technical properties, also to high temperature and pressure
  • Especially used for surfacing worn parts of tool steels
  • Main applications: hardfacing of hot cutting blades, hammers, grinding mills, forming dies, casting moulds and cylindrical surfaces
  • Economical solution: used on any steel for surfacing without the need for a special tool steel
  • Basic, Cr-Mo alloyed synthetic electrode with a stable arc and deep penetration
  • Metal recovery approx. 120 %
  • Depending on the parent material, preheating up to 400 °C may be required; if preheated, cool the workpiece slowly
  • Redry the electrode for 2 hours at 300 °C
Classification
EN 14700 class
E Z Fe8
DIN 8555 class
E3-UM-40 PT
Approvals

SEPRO

Validity is confirmed with the order

Hardness
approx. 400 HB
Process
Polarity
DC+/AC
Treatment and preparation
Re-drying
300 °C / 2 h
Pre-heating
400 °C
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-THERMO-RESIST-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue