We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Low-alloy steels

TEMPO B 63 — E 8018-G H4

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 350 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 450 mm
    ≈ 5 kg
  • Ø 5 × 450 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.60
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.57–10.23 kg

of TEMPO B 63 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.60 — from the datasheet (recovery 115 %, Ø 2.5 × 350 mm) · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm

100 °C

Minimum preheat and minimum interpass temperature

EN 1011-2, annex C, method B · rounded up to 5 °C

✓ Within the range of method B.

Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min

See the full calculation →

Field of application

  • Suitability for use in welding carbon and low-alloyed high-strength steels with carbon contents up to 0.6%
  • Suitability for use in rail-joint welding
  • Ductile and crack-resistant weld metals
  • Recovery of weld metals about 115%
  • Weldability at all positions except for vertical down positions
  • Weld deposits with very low contents of hydrogen
  • Requirement of re-drying for minimum 2 hours at the temperatures between 350°C and 400°C

Base metals

S355J2G3E295-E360C35-C60S315N-S500NP315NH-P500NHGE240-GE340rail steels up to 785 N/mm2
API 5L:
X52X56X60X65X70
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS classE 8018-G H4
EN ISO classE 50 3 B 42 H5

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.06
Mn1.60
Si0.70
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 500 MPa
Tensile strength (Rm)550–720 MPa
Elongation (A5)min. 19 %
Impact energy (KV)min. 47 J (−30 °C)

How to weld

Process

Recoveryapprox. 115 %

Treatment and preparation

Re-drying350–400 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm80–110 A
3.2 mm350 mm100–140 A
4 mm450 mm130–190 A
5 mm450 mm190–240 A
FERVEO guidance
By problem
Structural steels