Gedik · Low-alloy steels
SG Ni2 MIG — ER80S-Ni2
solid wire
Choose the size
- Ø 1.2 mm · BS 300 spool≈ 15 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 135 · η 0.92–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
4.62–6.66 kg
of SG Ni2 MIG for 10 m of weld
1 pack of 15 kg
Calculated with: η 0.92–0.98: typical value for process 135 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Field of application
- Applications down to -60°C on mild steels, low-alloy steels and fine-grained steels, plates, storage tanks, pipelines and equipment for cryogenic use
- Shielding gas: Ar+CO2 mix gases can be used
Base metals
S255NL2-S355NL214Ni612Ni14X12Ni5S255NS380NS255NLS380NLS255NL1-S355NL1S380NL1A333: Gr.1-3A442Gr55-60A334: Gr.310Ni1413MnNi63TTSI E355TTSI E 460HY 80TTSE 35 N
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down |
|---|---|
| Polarity | DC+ |
| Shielding gas | Ar + CO2 |
Classification and approvals
Classification
| AWS class | ER80S-Ni2 |
|---|---|
| EN ISO class | G2Ni 2 |
Approvals
- CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the wire
| C | 0.08 |
|---|---|
| Mn | 1.10 |
| Ni | 2.30 |
| Si | 0.55 |
Values in mass %.
Mechanical properties
after heat treatment: 620 ± 15 °C / 1 h
| Yield strength (Rp0.2) | min. 470 MPa |
|---|---|
| Tensile strength (Rm) | min. 550 MPa |
| Elongation (A5) | min. 24 % |
| Impact energy (KV) | min. 27 J (−60 °C) |
How to weld
Process
| Shielding | Requires shielding gas |
|---|
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same EN ISO designation
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| DT-SG 2,5Ni MIGDratec | G2 Ni2 | 640–740 MPa | 230 J (20 °C) | To order · price and lead time in the quote |