Gedik · Copper, brasses and bronzes

R1 AG MIG — S Cu1897 (CuAg1)
Technical datasheet · solid wire · Ø 1.2 mm
FT-R1-AG-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
S Cu1897 (CuAg1)
Diameters
Ø 1.2 mm
Sizes and packaging
Ø
Packaging
Code
1.2 mm
15 kg
GDK-6031100264
Application
- Applicability in arc welding of copper materials with high electric conductivity, of copper-silver alloys containing low amounts of phosphor as well as of pure copper
- Additional applicability in gas welding of deoxidized copper
- High electric conductivity (30-45 S.m/mm2)
- Use of Ar (I1) as shielding gas
Classification
EN ISO class
S Cu1897 (CuAg1)
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the wire
P
Ag
Cu
Mn
0.01
0.80–1.20
balance
0.10
Values in mass %.
Base metals
2.0076 · 2.0090 · 2.0040
Mechanical properties
Yield strength (Rp0.2)
80 MPa
Tensile strength (Rm)
200 MPa
Elongation (A5)
20 %
Hardness
approx. 50 HB
Process
Polarity
DC+
Shielding gas
Ar, I1
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-R1-AG-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue