Gedik · Creep-resisting Cr-Mo steels

OPUS 9 CM-15 — E 8015-B8 H4
Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 4 mm
FT-OPUS-9-CM-15-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 8015-B8 H4
Diameters
Ø 3.2 – 4 mm
Application
- Heat resistance and low hydrogen electrode with basic-type coating
- Resistance of weld metal to working temperatures up to 650°C
- Welding of pressurized boiler steels, pipe steel and steel castings
- Requirement of re-drying for min. 2 hours at the temperatures between 300°C and 350°C
Classification
AWS class
E 8015-B8 H4
EN ISO class
E CrMo9 B 42 H5
Approvals
CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.07
9.00
0.80
1.00
0.40
Values in mass %.
Base metals
X12CrMo9-1 · X7CrMo9-1 · A335 Gr. P9
Mechanical properties
Service temperature
max. 650 °C
after heat treatment: 740–780 °C / 2 h / 300 °C (air)
Yield strength (Rp0.2)
min. 460 MPa
Tensile strength (Rm)
min. 590 MPa
Elongation (A5)
min. 19 %
Impact energy (KV)
min. 34 J (20 °C)
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-9-CM-15-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue