Download PDF
← Technical datasheet
Gedik · Creep-resisting Cr-Mo steels
FERVEO

OPUS 2 CM-15 — E 9015-B3 H4

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-OPUS-2-CM-15-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 9015-B3 H4
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
80–110 A
GDK-3010100816
3.2 mm
350 mm
100–140 A
GDK-3010100819
4 mm
450 mm
130–180 A
GDK-3010100822
Application
  • Welding of steam boilers, steam pipes made of Cr-Mo-alloyed steels, nitrided steels, not-heat treated cementation steels
  • Resistance of weld metal to working temperatures up to 600°C
  • Requirement of Re-drying for min. 2 hours at the temperatures between 300°C and 350°C
Classification
AWS class
E 9015-B3 H4
EN ISO class
E CrMo2 B 42 H5
Approvals

CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.07
2.20
0.80
1.00
0.50
Values in mass %.
Base metals

10CrMo9-10 · 10CrMo5MoV7 · G18CrMo9-6 · A 335 Gr. P 22

Mechanical properties
Service temperature
max. 600 °C
after heat treatment: 690–750 °C / 1 h / 300 °C (air)
Yield strength (Rp0.2)
min. 530 MPa
Tensile strength (Rm)
min. 620 MPa
Elongation (A5)
min. 18 %
Impact energy (KV)
min. 47 J (20 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-2-CM-15-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Creep-resisting Cr-Mo steels
FERVEO

OPUS 2 CM-15 — E 9015-B3 H4

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-OPUS-2-CM-15-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-2-CM-15-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue