Download PDF
← Technical datasheet
Kjellberg · Carbon steels
FERVEO

OPTIMAL — E 6013

Technical datasheet · covered electrode · stick electrode · Ø 2 – 4 mm
FT-OPTIMAL-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 6013
Diameters
Ø 2 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2 mm
250 mm
60–80 A
1.6 kg
KJB-00400202
2.5 mm
350 mm
80–100 A
4.6 kg
KJB-00400253
3.25 mm
350 mm
110–140 A
4.6 kg
KJB-00400323
4 mm
350 mm
130–170 A
4.6 kg
KJB-00400403
Application

Covered electrode for welding non-alloy and low-alloy steels. Particularly suitable for thin sheet welding and for welding thin-walled tubes and sections. Fine-droplet, low-spatter metal transfer, giving very finely rippled welds without undercut and with easily removed slag. The arc is soft and stable. Striking, restriking and welding remain easy even at low welding current.

Classification
AWS class
E 6013
EN ISO class
E 42 0 RB 12
Approvals

BV, DNV-GL, LR, DB, TÜV, CE

Validity is confirmed with the order

Chemical composition of the weld metal
C
Mn
Si
0.10
0.50
0.25
Values in mass %.
Base metals

Non-alloy structural steels: S235 to S355 · Fine-grain structural steels: S275 to S355 · Shipbuilding steels: A, B, D, A32/36, D32/36 · Pressure vessel steels: P195 to P355 · Pipeline steels: L210 to L360 · Cast steels: GE200, GE240, GP240, G20Mo5, G21Mn5 · Reinforcing steels: BSt 420, BSt 500

QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPTIMAL-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Carbon steels
FERVEO

OPTIMAL — E 6013

Technical datasheet · covered electrode · stick electrode · Ø 2 – 4 mm
FT-OPTIMAL-EN
rev. 2 · 2026-11-21
page 2 / 2
Mechanical properties
Yield strength (Rp0.2)
> 440 MPa
Tensile strength (Rm)
510–560 MPa
Elongation (A5)
> 22 %
Impact energy (KV)
> 60 J (0 °C)
Process
Polarity
DC±/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PE overhead · PF vertical-up
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPTIMAL-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue