Gedik · Cast iron

NiFe SG TIG — S C NiFe-1
Technical datasheet · TIG rod · Ø 1.6 – 2.4 mm
FT-NIFE-SG-TIG-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
TIG rod
Standard
S C NiFe-1
Diameters
Ø 1.6 – 2.4 mm
Sizes and packaging
Ø
Length
Packaging
Code
1.6 mm
1000 mm
5 kg
GDK-6031100309
2 mm
1000 mm
5 kg
GDK-6031100310
2.4 mm
1000 mm
5 kg
GDK-6031100311
Application
- NiFe SG MIG-TIG wire is used for joining and build-up of all types of cast irons (gray, tempered, sfero) and cast iron to non alloyed and high alloyed steels, copper and nickel based alloys
- Especially it is suitable for building up cast moulds in automotive industry and iron and steel sector
- Machinability is easy and weld metal surface must be clean and pre-heat at 150°C - 250°C
- Shielding gas: Ar (MIG and TIG)
Classification
EN ISO class
S C NiFe-1
Approvals
CE, SEPRO
Validity is confirmed with the order
Chemical composition of the wire
C
Cu
Fe
Mn
Ni
0.05
0.35
44.0–46.0
0.60
min. 53.0
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
min. 290 MPa
Tensile strength (Rm)
min. 425 MPa
Elongation (A5)
min. 8 %
Hardness
200 HB
Process
Polarity
DC−
Shielding gas
Ar
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-NIFE-SG-TIG-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue