Download PDF
← Technical datasheet
Gedik · Cast iron
FERVEO

NiFe SG MIG — S C NiFe-1

Technical datasheet · solid wire · Ø 1.2 mm
FT-NIFE-SG-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
S C NiFe-1
Diameters
Ø 1.2 mm
Sizes and packaging
Ø
Packaging
Code
1.2 mm
15 kg
GDK-6031100308
Application
  • NiFe SG MIG-TIG wire is used for joining and build-up of all types of cast irons (gray, tempered, sfero) and cast iron to non alloyed and high alloyed steels, copper and nickel based alloys
  • Especially it is suitable for building up cast moulds in automotive industry and iron and steel sector
  • Machinability is easy and weld metal surface must be clean and pre-heat at 150°C - 250°C
  • Shielding gas: Ar (MIG and TIG)
Classification
EN ISO class
S C NiFe-1
Approvals

CE, SEPRO

Validity is confirmed with the order

Chemical composition of the wire
C
Cu
Fe
Mn
Ni
0.05
0.35
44.0–46.0
0.60
min. 53.0
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
min. 290 MPa
Tensile strength (Rm)
min. 425 MPa
Elongation (A5)
min. 8 %
Hardness
200 HB
Process
Polarity
DC+
Shielding gas
Ar
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
Treatment and preparation
Pre-heating
150–250 °C
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-NIFE-SG-MIG-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue