Gedik · Nickel alloys

NIBAZ B 71 — E NiCrFe3
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-NIBAZ-B-71-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E NiCrFe3
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
50–80 A
GDK-3010102031
3.2 mm
300 mm
75–105 A
GDK-3010102036
4 mm
350 mm
90–130 A
GDK-3010102041
Application
- This electrode is a Nickel-based and basic-type electrode
- Applicability in welding high-temperature steels and low-temperature alloyed or unalloyed steels, Nickel (Ni), and Ni-alloys
- High creep-resistance
- Serviceability at temperatures ranging between -196°C and 480°C
- Requirement of re-drying at 300°C-350°C for 2 hours
Classification
AWS class
E NiCrFe3
EN ISO class
E Ni 6182 (NiCr15Fe6Mn)
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Fe
Mn
Nb
Ni
Si
0.04
16.7
7.50
7.50
2.20
balance
0.60
Values in mass %.
Base metals
NiCr 15 Fe · LC-NiCr 15 Fe · NiCr 60 15 · INCONEL 600 · INCONEL 600L · INCOLOY 800
Mechanical properties
Yield strength (Rp0.2)
min. 360 MPa
Tensile strength (Rm)
min. 550 MPa
Elongation (A5)
min. 30 %
Impact energy (KV)
min. 47 J (20 °C) · min. 32 J (−196 °C)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-NIBAZ-B-71-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue