Gedik · Nickel alloys

Ni SG MIG — ER - Ni 1
Technical datasheet · solid wire · Ø 1.2 – 2.4 mm
FT-NI-SG-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
ER - Ni 1
Diameters
Ø 1.2 – 2.4 mm
Sizes and packaging
Ø
Length
Packaging
Code
1.2 mm
15 kg
GDK-6031100304
2.4 mm
1000 mm
5 kg
GDK-6031100110
Application
- Use in various applications of joint-welding of the materials Nickel 200/201 or stainless steels. Suitability for use in welding of carbon steels or of high-alloyed nickel or nickel-copper alloys
- Required use of Ar (I1) as shielding gas in TIG welding
Classification
AWS class
ER - Ni 1
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the wire
C
Mn
Ni
Si
Ti
0.02
0.40
balance
0.40
3.00
Values in mass %.
Base metals
2.4061 · 2.4116 · 2.4170 as well as copper and its combinations with steel castings
Mechanical properties
Yield strength (Rp0.2)
min. 300 MPa
Tensile strength (Rm)
min. 500 MPa
Elongation (A5)
min. 30 %
Impact energy (KV)
min. 250 J (20 °C)
Process
Positions
PA flat · PB horizontal-vertical
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-NI-SG-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue