Download PDF
← Technical datasheet
Kjellberg · Creep-resisting Cr-Mo steels
FERVEO

MOB — E 7018-A1

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-MOB-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 7018-A1
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
350 mm
70–100 A
4.3 kg
KJB-00470253
3.25 mm
350 mm
110–150 A
4.8 kg
KJB-00470323
4 mm
350 mm
140–180 A
4.7 kg
KJB-00470403
Application

Covered electrode with 0.4 % Mo in the all-weld metal, particularly suitable for steel 16Mo3, for vessel and boiler construction and pipeline construction at service temperatures up to 520 °C.

Classification
AWS class
E 7018-A1
EN ISO class
E Mo B 42
Approvals

TÜV, CE

Validity is confirmed with the order

Chemical composition of the weld metal
C
Mn
Mo
Si
0.08
1.00
0.40
0.40
Values in mass %.
Base metals

Non-alloy structural steels: S275 to S355 · Fine-grain structural steels: S275 to S460 · Pressure vessel steels: P195 to P460, 16Mo3 · Pipeline steels: L210 to L450 · Cast steels: GE200 , GE240, GP 240, G20Mo5

Mechanical properties
after stress relieving
Yield strength (Rp0.2)
> 450 MPa
Tensile strength (Rm)
540–590 MPa
Elongation (A5)
> 24 %
Impact energy (KV)
> 80 J (−10 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-MOB-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Creep-resisting Cr-Mo steels
FERVEO

MOB — E 7018-A1

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-MOB-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-MOB-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue