Download PDF
← Technical datasheet
Gedik · Hardfacing
FERVEO

KAVTAM

Technical datasheet · covered electrode · stick electrode · Ø 3.2 mm
FT-KAVTAM-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Diameters
Ø 3.2 mm
Sizes and packaging
Ø
Length
Current
Code
3.2 mm
350 mm
90–130 A
GDK-3030100090
Application
  • KAVTAM is a manual covered electrode alloyed with cobalt, chromium, manganese and silicon, used for hardfacing workpieces exposed to severe cavitation and erosion
  • The deposit also resists corrosion, cavitation and erosion at high temperatures
  • Main applications: hardfacing of hydraulic turbines, pumps, valves, casings and rotors
  • Hardness 250–300 HB as welded, rising in service up to 400–450 HB
  • The electrodes must be redried at 300 °C for at least 2 h before use
Approvals

SEPRO

Validity is confirmed with the order

Hardness
as welded
250–300 HB
Process
Polarity
DC+/AC
Treatment and preparation
Re-drying
300 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-KAVTAM-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue