Gedik · Hardfacing

HARDCOR M 67 FCW — T Z Fe 16
Technical datasheet · flux-cored wire (FCW) · Ø 1.6 mm
FT-HARDCOR-M-67-FCW-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
flux-cored wire (FCW)
Standard
T Z Fe 16
Diameters
Ø 1.6 mm
Sizes and packaging
Ø
Current
Voltage
Stick-out
Packaging
Code
1.6 mm
180–350 A
25–32 V
20.0–25.0 mm
15 kg
GDK-3030500026
Application
- High-alloy metal powder flux-cored wire without slag for hardfacing preferred without shielding gas
- Use with CO2 and Ar-CO2 mix possible
- The weld metal characteristics and structure is similar to hard chrome alloys
- Excellent resistance to abrasion from sand and minerals
- The weld metal is machinable only by grinding
- Stringer bead technique is recommended
- The hardfacing contains check cracks, but this does not impair wear resistance
Classification
EN 14700 class
T Z Fe 16
DIN 8555 class
MF 10 GF 65 G
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
B
C
Cr
Mn
Si
4.50
2.00
7.50
0.50
0.50
Values in mass %.
Hardness
as welded
65–67 HRC
Process
Polarity
DC+
Shielding gas
CO2, Ar + CO2
Shielding
Requires shielding gas
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-HARDCOR-M-67-FCW-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue