Download PDF
← Technical datasheet
Gedik · Hardfacing
FERVEO

HARDCOR 660 O FCW — T Fe9

Technical datasheet · flux-cored wire (FCW) · Ø 1.6 – 2.8 mm
FT-HARDCOR-660-O-FCW-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
flux-cored wire (FCW)
Standard
T Fe9
Diameters
Ø 1.6 – 2.8 mm
Sizes and packaging
Ø
Current
Voltage
Stick-out
Packaging
Code
1.6 mm
130–220 A
26–31 V
25.0–30.0 mm
15 kg
GDK-6031100379
2.8 mm
300–500 A
25–31 V
25.0–30.0 mm
25 kg
GDK-6031100380
Application
  • Build-up of crushers, rolls and hammers in the cement, mining and earthmoving industries, of jaws of earthmoving machines, of mining and stone-crushing machines and of crusher jaws
  • In the build-up of roller presses and hammers in the cement industry, also used as a buffer layer before hardfacing
  • Build-up of parts exposed to heavy impact, compression and wear
  • High resistance to impact and friction
  • Joining and build-up welding of carbon steels and austenitic manganese steels
  • The weld metal work-hardens in service
  • Self-shielded hardfacing flux-cored wire
Classification
EN 14700 class
T Fe9
DIN 8555 class
MF 7-GF-200 KP
Approvals

SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Fe
Mn
Si
0.40
15.0
balance
15.0
0.75
Values in mass %.
Hardness
as welded
18–24 HRC
Hardness after work hardening
45–52 HRC
Process
Polarity
DC+
Shielding
Self-shielded (open arc)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-HARDCOR-660-O-FCW-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue