Gedik · Hardfacing

HARDCOR 65 O FCW — T Fe 16
Technical datasheet · flux-cored wire (FCW) · Ø 1.6 mm
FT-HARDCOR-65-O-FCW-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
flux-cored wire (FCW)
Standard
T Fe 16
Diameters
Ø 1.6 mm
Sizes and packaging
Ø
Current
Voltage
Stick-out
Packaging
Code
1.6 mm
130–220 A
26–31 V
25.0–30.00 mm
15 kg
GDK-6031100209
Application
- It is self-shielded flux cored hardfacing welding wire composed of a high density of primary chromium with multiple secondary carbides
- Because of the high content of C, Cr, Mo, Nb, W, V and their hard carbides, hardness at the temperatures can be established
- Designed specifically for single and double pass applications in high temperature environments
- Weld deposit contains stress relief cracks, but this does not impair wear resistance
- Chromium-Niobium-Molybdenum alloy with addition of Tungsten and Vanadium designed to resist high stress grinding abrasion with low impact and solid erosion at service temperatures up to 650°C
Classification
EN 14700 class
T Fe 16
DIN 8555 class
MF 10 GF 65 GT
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
V
W
Cr
Fe
Mn
Mo
Nb
Si
5.20
1.00
2.00
21.0
balance
0.40
7.00
7.00
1.00
Values in mass %.
Mechanical properties
Service temperature
max. 650 °C
Hardness
as welded
63–65 HRC
Process
Polarity
DC+
Shielding
Self-shielded (open arc)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-HARDCOR-65-O-FCW-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue