Gedik · Hardfacing

HARDCOR 63 O FCW — T Fe 15
Technical datasheet · flux-cored wire (FCW) · Ø 1.6 – 2.8 mm
FT-HARDCOR-63-O-FCW-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
flux-cored wire (FCW)
Standard
T Fe 15
Diameters
Ø 1.6 – 2.8 mm
Sizes and packaging
Ø
Current
Voltage
Stick-out
Packaging
Code
1.6 mm
130–220 A
26–31 V
20.0–25.0 mm
15 kg
GDK-6031100374
2.8 mm
300–500 A
25–31 V
20.0–25.0 mm
25 kg
GDK-6031100186
Application
- Open-arc flux-cored wire for hardfacing, with chromium carbides
- Suitable for low-alloy and non-alloy steels
- The weld metal is very hard; transverse cracks in the bead are common
- A maximum of two passes can be deposited with this wire
Classification
EN 14700 class
T Fe 15
DIN 8555 class
MF 10-GF-60 G
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Fe
Mn
Si
5.00
27.0
balance
1.30
1.50
Values in mass %.
Hardness
as welded
60–64 HRC
Process
Polarity
DC+
Shielding
Self-shielded (open arc)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-HARDCOR-63-O-FCW-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue