Download PDF
← Technical datasheet
Kjellberg · Stainless steels
FERVEO

FINOX 4842 B — E 310-15

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-4842-B-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 310-15
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
300 mm
80–100 A
4 kg
KJB-00713250
3.25 mm
350 mm
100–130 A
5 kg
KJB-00713323
4 mm
350 mm
120–160 A
5 kg
KJB-00713403
Application

Electrode for joining and surfacing on matching or similar heat-resisting CrNi steels and cast steels for service temperatures up to 1200 °C, for tough joints and for intermediate and filling runs when welding Cr steels and cast steels. Also suitable for joining non-alloy and low-alloy steels and cast steels, or stainless and heat-resisting Cr steels and cast steels, to austenitic steels and cast steels for service temperatures up to 300 °C. The weld metal does not have sufficient resistance to reducing, sulphur-containing and carburising gases. In these cases, the capping run must be welded with FINOX 4820 AC.

Classification
AWS class
E 310-15
EN ISO class
E 25 20 B 22
Material no. (W.-Nr.)
1.4842
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.10
25.0
2.50
20.0
0.80
Values in mass %.
Base metals

1.4710 GX 30 CrSi 7 · 1.4713 X 10 CrAlSi 7 · 1.4724 X 10 CrAlSi13 · 1.4742 X 10 CrAlSi18 · 1.4762 X 10 CrAlSi 25 · 1.4828 X 15 CrNiSi 20-12 · 1.4833 X 12 CrNi 23-13 · 1.4840 GX 15 CrNi 25-20 · 1.4841 X 15 CrNiSi 25-21 · 1.4845 X 8 CrNi 25-21 · 1.4846 X 40 CrNi 25-21 · AISI 310, 310S, 314

Mechanical properties
Yield strength (Rp0.2)
> 350 MPa
Tensile strength (Rm)
> 550 MPa
Elongation (A5)
> 30 %
Impact energy (KV)
> 80 J (room temperature)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4842-B-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Stainless steels
FERVEO

FINOX 4842 B — E 310-15

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-4842-B-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
250–300 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4842-B-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue