Electrode for joining and surfacing on matching or similar heat-resisting Cr and CrNi steels and cast steels for service temperatures up to 1,100 °C, and on stainless, corrosion-resisting Mo-free Cr(Ni) steels and cast steels. The austenitic-ferritic weld metal is resistant to scaling up to 1,100 °C in air and oxidising (combustion) gases, and also has good resistance to reducing, sulphur-containing (combustion) gases.
Classification
EN ISO class
E 25 4 R 52
Materialno.(W.-Nr.)
1.4820
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.06
26.0
1.00
4.50
0.80
Values in mass %.
Base metals
1.4710 GX 30 CrSi7 · 1.4713 X 10 CrAlSi7 · 1.4724 X 10 CrAlSi13 · 1.4740 GX 40 CrSi17 · 1.4742 X 10 CrAlSi18 · 1.4762 X 10 CrAl 25 · 1.4821X15CrNiSi25-4 · 1.4823GX40CrNiSi27-4
Mechanical properties
Yield strength (Rp0.2)
> 500 MPa
Tensile strength (Rm)
> 700 MPa
Elongation (A5)
> 15 %
Impact energy (KV)
> 20 J (room temperature)
Hardness
as welded
180 HB
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4820-AC-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Kjellberg 2019 catalogue
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4820-AC-EN · rev. 2 · page 2 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Kjellberg 2019 catalogue