Download PDF
← Technical datasheet
Kjellberg · Stainless steels
FERVEO

FINOX 4430 F — E 316 L-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 3.25 mm
FT-FINOX-4430-F-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 316 L-16
Diameters
Ø 2.5 – 3.25 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
300 mm
80–100 A
4 kg
KJB-00706250
3.25 mm
350 mm
100–130 A
5 kg
KJB-00706323
Application

This covered electrode has been developed specifically for vertical-down welding. Electrode for joining low-carbon, unstabilised and stabilised austenitic corrosion-resisting CrNiMo steels at service temperatures up to 400 °C, for corrosion-resisting Cr steels and for claddings of similar composition.

Classification
AWS class
E 316 L-16
EN ISO class
E 19 12 3 L R 11
Material no. (W.-Nr.)
1.4430
Chemical composition of the weld metal
C
Cr
Mn
Mo
Ni
Si
0.02
19.0
0.80
2.70
12.5
0.90
Values in mass %.
Base metals

1.4401 X 5 CrNiMo 17-12-2 · 1.4404 X 2 CrNiMo 17-12-2 · 1.4406 X 2 CrNiMoN 17-11-2 · 1.4408 GX 5 CrNiMo 19-11-2 · 1.4409 GX 2 CrNiMo 19-11-2 · 1.4429 X 2 CrNiMoH 17-13-3 · 1.4435 X 2 CrNiMo 18-14-3 · 1.4436 X 3 CrNiMo 17-13-3 · 1.4571 X 6 CrNiMoTi 17-12-2 · 1.4580 X 6 CrNiMo- Nb 17-12-2

AISI: 316 · 316L · 316 Cb · 316Ti

Mechanical properties
Yield strength (Rp0.2)
> 350 MPa
Tensile strength (Rm)
> 550 MPa
Elongation (A5)
> 30 %
Impact energy (KV)
> 60 J (room temperature)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4430-F-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Stainless steels
FERVEO

FINOX 4430 F — E 316 L-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 3.25 mm
FT-FINOX-4430-F-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PG vertical-down
Treatment and preparation
Re-drying
300–350 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4430-F-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue