We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Stainless steels

FINOX 4430 AC — E 316 L-16

covered electrode · stick electroderutile coating

Choose the size

  • Ø 1.6 × 250 mm · 3 kg
    ≈ 3 kg
  • Ø 2 × 300 mm · 4 kg
    ≈ 4 kg
  • Ø 2.5 × 300 mm · 4 kg
    ≈ 4 kg
  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 5 × 450 mm · 6 kg
    ≈ 6 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.11–11.36 kg

of FINOX 4430 AC for 10 m of weld

4 packs of 3 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 316L

Not recommendedFN 0.0 (WRC-1992)

  • Fully austenitic: sensitive to hot cracking.

Maximum dilution with this filler: 4.0 %

Calculated with: filler 316L — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

Electrode for joining low-carbon, unstabilised and stabilised austenitic corrosion-resisting CrNiMo steels at service temperatures up to 400 °C, also for claddings of similar composition.

Base metals

1.4401 X 5 CrNiMo 17-12-21.4404 X 2 CrNiMo 17-12-21.4406 X 2 CrNiMoN 17-11-21.4408 GX 5 CrNiMo 19-11-21.4409 GX 2 CrNiMo 19-11-2
AISI:
316316L316 Cb316Ti
1.4435 X 2 CrNiMo 18-14-31.4436 X 3 CrNiMo 17-13-31.4571 X 6 CrNiMoTi 17-12-21.4580 X 6 CrNiMo- Nb 17-12-21.4429 X 2 CrNiMoH 17-13-03
PositionsPA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE 316 L-16
EN ISO classE 19 12 3 L R 12
Material no. (W.-Nr.)1.4430

Approvals

  • DB, TÜV, CE
According to the Kjellberg 2019 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.02
Cr19.0
Mn0.80
Mo2.70
Ni12.5
Si0.90
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)> 350 MPa
Tensile strength (Rm)> 550 MPa
Elongation (A5)> 30 %
Impact energy (KV)> 60 J (room temperature)

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
1.6 mm250 mm40–60 A
2 mm300 mm60–80 A
2.5 mm300 mm80–100 A
3.25 mm350 mm100–130 A
4 mm350 mm120–160 A
5 mm450 mm160–200 A
FERVEO guidance
By problem
Corrosion-resistant alloys
Alternatives in the catalogue
Same class
same AWS designation
ProductClassRmKVAvailability
ELOX R 316 LGedikE316L-16540–670 MPamin. 47 J (20 °C)To order · price and lead time in the quote
FINOX 4430 FKjellbergE316L-16> 550 MPa> 60 J (room temperature)To order · price and lead time in the quote